Two simple testing methods for fire-retardant fabrics
2 simple methods that can test flame-retardant Oxford fabrics without instruments: match test method and lighter test method.
Match test method
The match test method can evaluate the flame retardant effect of fire retardant fabrics or relatively compare the flame retardant properties. During the test, take a strip of fabric about 62.5px x 750px, use a lit match, place it under the strip sample, burn until the match burns out, and observe the condition or flame-retardant effect of the flame-retardant fabric. Sometimes it can be stipulated that the sample does not burn for more than 5 seconds to be qualified, and if it exceeds the center line or smolders for more than 15 seconds, it is deemed to be unqualified.
Lighter test method
The size of the sample can be determined according to the test needs. A lighter is used as the heat source, and the time is generally 5 seconds. The heat source can be placed in a location similar to the application conditions. After the fire is extinguished, observe the spread of the flame. If the flame spread is not serious, it is qualified.
The current flagship product of Textile is fire-resistant and flame-retardant Oxford cloth fabrics. It is a post-finishing flame-retardant process. It has the same quality as those on the market and a better price. If you want to know more, please Consult customer service or call:
Part of the content of some of our articles comes from the Internet. If there is any infringement, please contact us and we will delete it as soon as possible, thank you!
AAAFNJKIYO9P
Disclaimer:
Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.
AA
