China Garment Website_China's popular garment and fashion information platform China Garment News The impact of the main components of the equipment on the output and quality of velvet stripping Saw blade diameter

The impact of the main components of the equipment on the output and quality of velvet stripping Saw blade diameter



The impact of the main components of the equipment on the output and quality of lint stripping Saw blade diameter The diameter of the saw blade is large, the arc of the saw blade e…

The impact of the main components of the equipment on the output and quality of lint stripping Saw blade diameter

The diameter of the saw blade is large, the arc of the saw blade extending into the work box is long, the number of working teeth is large, and the stripping efficiency is high; the diameter of the saw blade is small, the arc of the saw blade extending into the work box is short, and the number of working teeth is small , low stripping rate. The effect of saw blade diameter on stripping rate is shown in Table 9-5.

Saw blade The cylinder is easily worn during production. When the saw teeth are damaged and incomplete beyond the specified limit, in order to make full use of the saw blade, it should be re-cut by a tooth chopping machine. Each time the saw blade is reorganized, the diameter of the saw blade is reduced by 10 mm. When the diameter of the saw blade is less than 280 mm, it is not suitable to re-make it. The diameter of the saw blade is large, the arc of the saw blade extending into the working box is long, the number of working teeth is large, and the stripping efficiency is high; the diameter of the saw blade is small, the arc of the saw blade extending into the working box is short, the number of working teeth is small, and the stripping efficiency is high rate is low. The effect of saw blade diameter on stripping rate is shown in Table 9-5.
The saw blade cylinder is prone to wear and tear during production. When the saw teeth are damaged and incomplete beyond the specified limit, in order to make full use of the saw blade, it should be re-cut by a tooth chopping machine. Each time the saw blade is reorganized, the diameter of the saw blade is reduced by 10 mm. When the diameter of the saw blade is less than 280 mm, it is not suitable to re-make it.

AAASDFWERTEYRHF

This article is from the Internet, does not represent 【www.china-garment】 position, reproduced please specify the source.https://www.china-garment.com/archives/44895

Author: clsrich

 
TOP
Home
News
Product
Application
Search