YW type water jet loom



YW type water jet loom YW618 water-jet loom is a new type of water-jet loom independently developed and produced by Xingping Yongxing Cloth Machinery Co., Ltd. (formerly Huaxing Av…

YW type water jet loom

YW618 water-jet loom is a new type of water-jet loom independently developed and produced by Xingping Yongxing Cloth Machinery Co., Ltd. (formerly Huaxing Aviation Wheel Company) based on market demand and absorbing foreign advanced technology. This product is driven by the main drive It is composed of let-off, weft insertion, shedding, take-up, selvage and other mechanisms, and is operated by an advanced electronic control system. It has high speed, low noise, effective reed width and high weft insertion rate. The fabric has the characteristics of stable quality and wide weaving range.
Suitable weaving range Mainly suitable for hydrophobic filaments such as regenerated fibers and synthetic fibers as raw materials. Weaving light and medium-thick fabrics.
Main structure This machine adopts cast wall panels, and the design mechanism has exquisite transmission and is suitable for high-speed operation. All key components and important bearings are imported to maintain high stability and durability of the loom.
Electrical weft detection and electric weft detection are combined with single-chip microcomputer to control the electrical system. The weft detection has high sensitivity and good working reliability.
Shedding device: Flat fabrics can adopt a single-sided crank four-link transmission mechanism, the heald frame has 6 pages more, and the dobby shedding can be equipped with 16 heald frames.
The weft insertion device adopts a plunger water pump and a new annular nozzle to improve the clustering of the jet and the weft insertion capability.
Warp let-off device adopts a let-off mechanism with a heavy hammer to adjust the tension change, making the warp tension more stable. The adjustment range from high tension to low tension is wide and easy to adjust. The tension changes smoothly from the full shaft to the empty shaft, and no other compensation device is needed.
The winding device adopts an automatic tension adjustment mechanism so that the fabric can be wound with appropriate tension. The wrinkle prevention device adopts a rod-type cloth pressing mechanism.
The length measurement device adopts RDP length measurement or ROJ electronic weft storage length measurement method.
The beat-up device adopts double-side drive four-link beat-up.
Lubrication device adopts tank oil bath lubrication and multi-point lubrication.





AAASDFERHYTJTI

Extendedreading:https://www.alltextile.cn/product/product-22-328.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
ExtendedReading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.china-garment.com】 position, reproduced please specify the source.https://www.china-garment.com/archives/46369

Author: clsrich

 
TOP
Home
News
Product
Application
Search